Lead Acid Archives - Morningstar Corporation

GenStar MPPT

Boom Visibility — Mon, 12 Sep 2022 12:55:42 +0000

The post GenStar MPPT appeared first on Morningstar Corporation.

EcoBoost MPPT

General Editor — Tue, 21 Nov 2017 21:44:43 +0000

With Free Phone Holder
Metered Version
Non-Metered Version

The EcoBoost MPPT solar charge controller brings Morningstar’s proprietary TrakStar Technology to our new line of Essentials controllers and accessories. The EcoBoost controllers automatically detect 12 or 24 V system configuration. They are highly efficient and accurate controllers designed to ensure that batteries attain a complete state of charge. They are also sophisticated load controllers. Using this feature to manage DC power consumption protects the batteries from over discharge and helps ensure long term system reliability. Small DC loads can be powered directly from the EcoBoost by way of two USB charging ports.

Morningstar EcoBoost controllers act as the central brain of PV powered DC electrical systems up to 1,120 watts and offer outstanding value, performance and dependability. These controllers are designed for international markets and are not sold in the USA or Canada.

How to Buy

Key features and benefits

Rugged, Maintenance-free Design
Conformally coated circuit board and corrosion resistant terminals.
Maximizes Energy Harvest
Using TrakStar MPPT technology to determine and adjust to the true maximum power point as solar insolation changes throughout the day.
High Efficiency
At low, medium, and high power levels.
Optional Meter
Provides access to system operational information including current and historical performance data. All EcoBoost “M” controllers include the meter.
USB Charging
Two USB ports with 3 amps of shared charging capacity to charge today’s modern mobile devices.
Self Diagnostics
Continuous monitoring and reporting of any errors through its status LED’s, or its optional display.
Lighting Controller
Uses PV array to switch at dusk and dawn.
Load Controller
Connect DC loads directly to the controller. Programmable load disconnect to protect batteries.
PV Array Flexibility
Enables 2 modules in series to charge a 12V or 24V battery system.

Specifications and Certifications

ModelEB-MPPT-20EB-MPPT-20MEB-MPPT-30EB-MPPT-30MEB-MPPT-40EB-MPPT-40M

*Input power can exceed Nominal Operating Power. Controller will limit and provide its rated continuous maximum output current into batteries.
Charge Rating	20 amps	20 amps	30 amps	30 amps	40 amps	40 amps
Max. PV Open Circuit Voltage (Voc)	120 volts	120 volts	120 volts	120 volts	120 volts	120 volts
Nominal Battery Voltage	12V or 24V	12V or 24V	12V or 24V	12V or 24V	12V or 24V	12V or 24V
Nominal max. Operating Power* – 12 volt battery	300W @40C	300W @40C	400W @40C	400W @40C	560W @40C	560W @40C
Nominal max. Operating Power* – 24 volt battery	600W @40C	600W @40C	800W @40C	800W @40C	1120W @40C	1120W @40C
Peak efficiency	98%	98%	98%	98%	98%	98%
Battery Voltage Range	10-35V	10-35V	10-35V	10-35V	10-35V	10-35V
Voltage Accuracy	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV
Operating Temperature Range	-40 C to +60C	-40 C to +60C	-40 C to +60C	-40 C to +60C	-40 C to +60C	-40 C to +60C
Warranty	2 Years	2 Years	2 Years	2 Years	2 Years	2 Years
Built-in meter		Yes		Yes		Yes
CE and RoHS compliant	Yes	Yes	Yes	Yes	Yes	Yes
IEC 62109, EN 62109-1	Yes	Yes	Yes	Yes	Yes	Yes
Emissions 55014-1, Immunity 55014-2	Yes	Yes	Yes	Yes	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes	Yes	Yes	Yes	Yes

Datasheets

Download the EcoBoost MPPT Solar Charge Controller Datasheet.

Operation Manuals

Download the EcoBoost MPPT Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post EcoBoost MPPT appeared first on Morningstar Corporation.

EcoPulse

General Editor — Mon, 06 Feb 2017 17:28:29 +0000

Metered Version
Non-Metered Version

The EcoPulse is a pulse width modulation (PWM) solar charge
controller within Morningstar’s Essential Series of products which provides essential off-grid battery regulation functions. This controller is easy to use, and designed for residential and leisure consumer applications. Metered and non-metered versions of this product are available at 10, 20, and 30 amp charge ratings for 12 and 24 volt battery systems. The EcoPulse is not sold in the USA or Canada.

How to Buy

Key features and benefits

High Reliability
Conformally coated circuit board and corrosion resistant
terminals.
Robust Thermal Design
Extruded aluminum heatsink dissipates heat quickly without
using cooling fans.
Durable Casing
High strength polycarbonate case.
LED Fault Indications
Alert when short circuit, over current, high voltage, and other
error conditions take place.
Automatic Solar Based Lighting Control
Field adjustable dusk ‘til dawn setting.
Adjustable Charge Settings
Seven presets and a custom setting can be set via DIP Switches or
by the meter display buttons.
Adjustable Load Control
Load control can be adjusted via meter display.
Optional Meter
Multi-lingual interface with scroll buttons to adjust the settings and
display metrics.

Specifications and Certifications

Model	EC-10	EC-10M	EC-20	EC-20M	EC-30	EC-30M

Charge Rating	10 amps	10 amps	20 amps	20 amps	30 amps	30 amps
Max. PV Open Circuit Voltage (Voc)	60 volts	60 volts	60 volts	60 volts	60 volts	60 volts
Nominal Battery Voltage	12V or 24V	12V or 24V	12V or 24V	12V or 24V	12V or 24V	12V or 24V
Self-Consumption	<15mA	<20mA	<15mA	<20mA	<15mA	<20mA
Transient Surge Protection	1500 Watts	1500 Watts	1500 Watts	1500 Watts	1500 Watts	1500 Watts
Battery Voltage Range	10-35V	10-35V	10-35V	10-35V	10-35V	10-35V
Operating Temperature Range	-40 C to +45C	-40 C to +45C	-40 C to +45C	-40 C to +45C	-40 C to +45C	-40 C to +45C
Warranty	2 Years	2 Years	2 Years	2 Years	2 Years	2 Years
Built-in meter		Yes		Yes		Yes
CE and RoHS compliant	Yes	Yes	Yes	Yes	Yes	Yes
TUV Listed: IEC 62109	Yes	Yes	Yes	Yes	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes	Yes	Yes	Yes	Yes

Datasheets

Download the EcoPulse Solar Charge Controller Datasheet.

Operation Manuals

Download the EcoPulse Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post EcoPulse appeared first on Morningstar Corporation.

ProStar

General Editor — Mon, 07 Nov 2016 22:58:28 +0000

Metered Version
Non-Metered Version

The ProStar solar charge controller has been the leading mid-range pulse width modulation (PWM) controller since 1995. With over 350,000 units installed in the harshest environments in over 100 countries, ProStar sets the standards in performance and reliability for the rest of the solar industry.

The Generation 3 ProStar shares the outstanding build quality and familiar form factor of its predecessors and adds data and lighting control capabilities, a graphical interface, and advanced protection features that meet the needs of today’s most demanding off-grid solar applications. ProStar provides both “the legend and the latest” in a single new product.

“…you get what you pay for, and this one is worth every penny…count on Morningstar.”

How to Buy

Key features and benefits

High Reliability
Latest electronic and environmental protections, quality control,
and design considerations comply with IEC 62109 and promote
longevity in the harshest environments
High Temperature Operation
Full nameplate current rating, both solar and load up to 60°C
continuous
Auto-Battery-Select
12V and 24V systems
Data Logging
Up to 256 days of solar charge and load consumption data
Self-diagnostics
Continuous monitoring and reporting of any errors or system
faults through its status LED’s, optional display and
communication port
Meter
High resolution LCD, multi-lingual backlit graphical display of system voltage, current, temperature, lighting settings, etc.
Custom Programming
Dip switches, meter interface, or connection with a computer can be
used to adjust charging, load communications, and lighting control
Low Noise Design
Meets US Federal Communications Commission Class B specifications
Automatic Solar-Based Lighting Control
Field adjustable, multi-event load control enables powerful options for
solar lighting systems
MODBUS Communications
Open standard MODBUS communications protocol allows for control
and remote data access
SNMP (Simple Network Management Protocol) Monitoring
Provides more detailed monitoring of all system data with existing IT
management and architecture when connected to EMC-1 accessory

Specifications and Certifications

ModelPS-15PS-15MPS-30PS-30M


Charge Rating	15 amps	15 amps	30 amps	30 amps
Max. PV Open Circuit Voltage (Voc) for 12/24V batteries	30/60 volts	30/60 volts	30/60 volts	30/60 volts
Nominal Battery Voltage	12V or 24V	12V or 24V	12V or 24V	12V or 24V
Battery Voltage Range	10-35V	10-35V	10-35V	10-35V
Voltage Accuracy	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV	<=0.1% +/- 50mV
Operating Temperature Range	-40 C to +60C	-40 C to +60C	-40 C to +60C	-40 C to +60C
Warranty	5 Years	5 Years	5 Years	5 Years
Built-in meter		Yes		Yes
CE and RoHS compliant	Yes	Yes	Yes	Yes
TAA compliant	Yes	Yes	Yes	Yes
Approved for use in Hazardous Locations: Class 1, Division 2, Groups A-D	Yes	Yes	Yes	Yes
IEC 62109	Yes	Yes	Yes	Yes
ETL Listed [UL-1741 and Canadian CSA C22.2 No.107.1.01]	Yes	Yes	Yes	Yes
FCC Class B Part 15 Compliant	Yes	Yes	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes	Yes	Yes

Datasheets

Download the ProStar Solar Charge Controller Datasheet.

Operation Manuals

Download the ProStar Solar Charge Controller Manual.

Videos

[youtube_embed id=”k5ql4BtpIN0″]

ProStar (Gen3) Controller – 3 minute video

This short video highlights the ProStar (Gen3) PWM solar charge controller. This device has been upgraded, while maintaining the same quality and form factor of previous models that have been installed in over 100 countries in the world’s harshest environments since 1995. View this video to learn about the new features and capabilities of this product including enhanced custom programming, data logging, communications, and lighting control.

[youtube_embed id=”hINCNOuSqa0″]

ProStar (Gen3) Solar Charge Controller Presentation

Recorded Webinar

This presentation provides a more in depth overview the ProStar (Gen3) PWM solar charge controller. You’ll see a comparison between the Gen3 and earlier ProStar models concerning meter displays, self-diagnostics, load/lighting control, communications, data logging, certifications, and other features.

Applications

[new_product_applications]

Accessories

[comp_products]

The post ProStar appeared first on Morningstar Corporation.

SHS

Boom Visibility — Mon, 04 Nov 2013 15:42:39 +0000

6 amp model
10 amp model
6 amp NL model
10 amp NL model

Morningstar’s well-known high quality and reliability is now available in a low cost solar controller. The SHS Controller is ideal for rural electrification systems with one to three solar panels. This controller was designed for markets outside the USA and Canada, and meets World Bank specifications and provides many features and benefits. The SHS Night Light version has automatic lighting control.

How to Buy

Key features and benefits

Low Cost
The SHS was specifically designed to meet the needs of the rural
electrification market. The low cost resulted from using the latest
electronic technology and high volume manufacturing.
Designed for High Quality and Reliability
The SHS controller has no moving parts which greatly reduces
failure rates.
Electronic Protections
The SHS has built-in electronic fuses that do not require
replacement. Any wiring mistakes during installation will not damage the
controller.
Tropicalization
The SHS electronics are protected with a moisture-tight coating,
minimizing damage from humidity and from nesting insects.
Easy to Use
The SHS controller is fully automatic and requires no adjustments
or user selections.
Reduces Cost of Battery Replacements
The low voltage disconnect will increase battery life. The loads are automatically disconnected when the battery is low and automatically reconnected after the battery is recharged. Complete charging will increase battery life and storage capacity. The controller will maximize the amount of solar energy into the battery and avoid drying out the battery.
Provides Useful Information
LEDs display status information and battery level which helps the
user to better operate the solar power system.

Specifications and Certifications

ModelSHS-6SHS-10SHS-NL-6SHS-NL-10


Charge Rating	6 amps	10 amps	6 amps	10 amps
Nominal Battery Voltage	12V	12V	12V	12V
Self-Consumption	8mA max.	8mA max.	8mA max.	8mA max.
Operating Temperature Range	-25 C to +50C	-25 C to +50C	-25 C to +50C	-25 C to +50C
Warranty	2 Years	2 Years	2 Years	2 Years
CE compliant	Yes	Yes	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes	Yes	Yes

Datasheets

Download the SHS Solar Charge Controller Datasheet.

Operation Manuals

Download the SHS Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post SHS appeared first on Morningstar Corporation.

SunGuard

Boom Visibility — Mon, 04 Nov 2013 15:41:10 +0000

straight view
angled view

The SunGuard is a single module, compact PWM solar charge controller for small systems, ideal for both professional and consumer use. With SunGuard, there’s no reason not to insist on Morningstar quality with any system design—no matter how small.

“Rock solid, potted so waterproof, long
track-record…great charge controller for a small system”

How to Buy

Key features and benefits

Rugged design—100% solid state, epoxy encapsulated; rated for 25%
overcurrents (no need to de-rate)
Longer battery life—series design PWM charging (instead of shunt)
with temperature compensation, low self-consumption
Easy to install—outdoor rated connecting wires make a waterproof
connection to the solar module and battery

Specifications and Certifications

ModelSG-4

*Input power can exceed Nominal Operating Power. Controller will limit and provide its rated continuous maximum output current into batteries.
Charge Rating	4.5 amps
Max. PV Open Circuit Voltage (Voc)	30 volts
Nominal Battery Voltage	12V
Self-Consumption	6mA
Voltage Accuracy	60mV
Operating Temperature Range	-40 C to +60C
Warranty	5 Years
CE and RoHS compliant	Yes
Manufactured in a Certified ISO 9001 Facility	Yes

Datasheets

Download the SunGuard Solar Charge Controller Datasheet.

Operation Manuals

Download the SunGuard Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post SunGuard appeared first on Morningstar Corporation.

SunLight

Boom Visibility — Mon, 04 Nov 2013 15:39:13 +0000

straight view
angled view

The SunLight solar charge controller is World’s leading solar lighting controller for street and pathway lighting, parking areas, bus stations, signage, and much more. This unit is based off of our reliable epoxy coated SunSaver design and the addition of a microcontroller for automatic lighting control functions.

“Bulletproof and dependable…I will use them again and again”

How to Buy

Key features and benefits

Provides 10 lighting options
with accurate on-board timer. User adjustable for 2 to 10 hours ON or for ON all night. Unique ON/OFF/ON settings conserve energy and turn lights on again for 1 or 2 hours before sunrise. Timer accuracy is within 2 seconds.
Easy to set-up
with test-button feature and LED indicator. To confirm correct installation, test button turns light on during the day and LED indicates selected lighting option.
Rugged design
with anodized aluminum enclosure, epoxy encapsulation, corrosion-resistant terminals.
Extremely accurate
Microcontroller digital accuracy

Specifications and Certifications

ModelSL-10L-12VSL-10L-24VSL-20L-12VSL-20L-24V


Charge Rating	10 amps	10 amps	20 amps	20 amps
Max. PV Open Circuit Voltage (Voc)	30 volts	60 volts	30 volts	60 volts
Nominal Battery Voltage	12V	24V	12V	24V
Minimum Battery Voltage	6V	6V	6V	6V
Voltage Accuracy	+/- 25mV	+/- 48mV	+/- 25mV	+/- 48mV
Operating Temperature Range	-40 C to +60C	-40 C to +60C	-40 C to +60C	-40 C to +60C
Warranty	5 Years	5 Years	5 Years	5 Years
CE and RoHS compliant	Yes	Yes	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes	Yes	Yes

Datasheets

Download the SunLight Solar Charge Controller Datasheet.

Operation Manuals

Download the SunLight Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post SunLight appeared first on Morningstar Corporation.

SunKeeper

Boom Visibility — Mon, 04 Nov 2013 15:37:32 +0000

6 amp version
12 amp version

SunKeeper solar controller provides a low cost regulated output directly from the solar module to maximize battery life in small solar power applications. The SunKeeper is epoxy encapsulated and rated for outdoor use. By mounting directly to the module junction box and wiring through the junction box knockout, the connection is weather-proof. This eliminates the need for an additional housing for the controller.

“This is a great little unit…an outstanding charge controller”

How to Buy

Key features and benefits

High Temperature Rated
Rated to 70°C to operate in high temperatures at the solar module.
More reliable than controllers mounted inside the junction box. Uses
very low on-resistance power MOSFET’s. No need to re-rate.
Outdoor Rated Rugged Design
ETL approved for outdoor use without an additional enclosure. Rugged
IP65, UV resistant case. Epoxy encapsulated printed circuit board and watertight connection to the module junction box.
Ideal for Oil/Gas Applications
Specifically designed for solar power systems in the oil/gas industry.
Approved for use in Class 1, Division 2, Groups A,B,C,D.
Extensive Electronic Protections
Fully protected against reverse polarity, short circuit, overcurrent, lightning and transient surges, high temperature and reverse current at night.
Longer Battery Life
Series PWM with 3 stage charging: bulk, PWM regulation and float.
Includes temperature compensation at the controller or alternatively at
the battery when using optional remote temperature sensor. Able to
charge a zero voltage battery.
More Information
Bi-color LED is easy to read from the ground when the solar module
is pole-mounted. Indicates solar charging, regulation, normal nighttime operation and any controller or system faults.
Easy to Install
Fits standard half inch conduit knockout (PG 13.5, M20) in module
junction box. Quickly fastens with included locknut. Wires have fork
connectors for easy connection to solar module terminals.

Specifications and Certifications

ModelSK-6SK-12

Charge Rating	6 amps	12 amps
Max. PV Open Circuit Voltage (Voc)	30 volts	30 volts
Nominal Battery Voltage	12V	12V
Self-Consumption	2-7 mA	2-7 mA
Minimum Battery Voltage	0V	0V
Voltage Accuracy	+/- 150mV	+/- 150mV
Operating Temperature Range	-40 C to +70C	-40 C to +70C
Warranty	5 Years	5 Years
CE and RoHS compliant	Yes	Yes
Approved for use in Hazardous Locations: Class 1, Division 2, Groups A-D	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes

Datasheets

Download the SunKeeper Solar Charge Controller Datasheet.

Operation Manuals

Download the SunKeeper Solar Charge Controller Manual.

Applications

[new_product_applications]

Accessories

[comp_products]

The post SunKeeper appeared first on Morningstar Corporation.

SunSaver Duo

Boom Visibility — Mon, 04 Nov 2013 15:35:01 +0000

angled view
straight view
with remote meter

Morningstar’s SunSaver Duo is an advanced PWM two battery controller for RV’s, caravans, boats and cottages. This product will charge two separate and isolated batteries at the same time, such as a “house” and an engine battery, based on user selectable priorities. The SunSaver Duo employs Morningstar’s legendary SunSaver controller technology, whose long-term track record for high reliability and improved battery charging is well-recognized in the solar industry.

An optional backlit remote meter can be purchased with this controller, and mounted in or on a wall, to display digital and pictorial status information about the solar power system. The SunSaver Duo is epoxy encapsulated for environmental protection, is user adjustable via DIP switch or connection to a personal computer, and has an optional remote temperature sensor.

“Love it…it was worth the extra money over other brands that seemed to be of lesser quality”

How to Buy

Key features and benefits

Dual Battery Charging Capability
Solar charge current is shared between the two batteries based on a user selectable priority (house and vehicle for example). When one battery is fully charged, all of the charge current flows to the other battery. This eliminates the need for a second solar charging system and isolation between the batteries.
User Adjustable
Set parameters with on-board DIP switches or further customize with a PC using Morningstar MSView software.
Provides Useful Information
The remote meter and LED’s display system status data and any system errors. Custom icons and back lighting make the meter easy to read and understand.
Lower Cost
Two battery charging eliminates the added cost of two separate solar charging systems and the need for isolation between the batteries.
Easy to Install
The controller is installed near the batteries using the clearly labeled large wire terminals. The remote meter may be mounted in the wall or on the wall using the included frame. Also includes the meter wiring with RJ-11 connector.
Longer Battery Life
Four stage series PWM pulse charging and temperature compensation increases the useful life of the batteries.
Extensive Electronic Protections
The controller will not be damaged by wiring mistakes during installation. There are no fuses to replace, and the controller will automatically re-set after a wiring mistake.
Highly Reliable
Epoxy encapsulation protects the controller against dust and high humidity. Efficient electronics and a conservative thermal design allow the controller to operate reliably at high temperatures. Five year warranty and estimated 15 year life.

Specifications and Certifications

ModelSSD-25SSD-25RM

*Input power can exceed Nominal Operating Power. Controller will limit and provide its rated continuous maximum output current into batteries.
Charge Rating	25 amps	25 amps
Max. PV Open Circuit Voltage (Voc)	30 volts	30 volts
Nominal Battery Voltage	12V	12V
Self Consumption	6 to 10 mA	6 to 15 mA
Battery Voltage Range	1-15V	1-15V
Voltage Accuracy	1.0%	1.0%
Operating Temperature Range	-40 C to +45C	-40 C to +45C
Warranty	5 Years	5 Years
Remote Meter included
CE and RoHS compliant	Yes	Yes
Manufactured in a Certified ISO 9001 Facility	Yes	Yes

Datasheets

Download the SunSaver Duo Solar Charge Controller Datasheet.

Operation Manuals

Download the SunSaver Duo Solar Charge Controller Manual.

- English / EN (English)

Applications

[new_product_applications]

Accessories

[comp_products]

The post SunSaver Duo appeared first on Morningstar Corporation.